Flooring Adhesive / Mapei Ultrabond Eco S940 1K

Fully bond you V4 Wood Flooring and Concreate Flooring with this amazing wood flooring adhesive from Map. One-component solvent-free, silylated polymer-based with very low emission level of volatile organic compounds. Suitable for installing all types of pre-finished plywood flooring and medium size planks of solid wood up to 90mm wide. Recommended for V4 Wood Flooring where a fully bonded installation is required. Fully tested to work with Concreate flooring panels.

Description: One-component solvent-free wood flooring adhesive

Type of Adhesive: Silylated polymer-based adhesive

Pack Size: 15Kg

Fully Bonded Installation: Yes

Suitable For Underfloor Heating: Yes

Open time (formation of surface skin): 35 minutes

Adjustment time: 100 minutes

Set to light foot traffic: approx. 12 hours

Recommended application temperature range: from +10°C to +35°C

EMICODE: EC1 R Plus – very low emission

Coverage: 800-1200 g/m².

Application Basics

Spread the adhesive on the substrate using a MAPEI notched trowel for wood. Wood has to be laid within approximately 35 minutes under normal temperature conditions (at +23°C and 50% R.H.). If left-over adhesive from previous applications is to be used, open the drum, remove the skin formed on the surface of the adhesive and proceed as above. The layer of skin helps to preserve the left-over adhesive. Find out more about fully bonded installation here.

Useful Downloads
  Technical Data Sheet

  Safety Data Sheet

Join our Newsletter

We will keep you informed of new products and flooring trend. And we will inspire you with access to all the new photo case studies all from real floors in amazing spaces. Subscribe today!

Subscribe here